|
Special Application Hardware
|
| WTF has developed
many accessories that help make special applications
with concrete forms more simple and efficient for contractors.
From hardware used with fillers to a slide hammer that
eases the concrete form stripping process, WTF's special
application hardware is designed to make the concrete
forming process more efficient and labor friendly for
you and your crew.
|
|
|
| |
|
90°
Angle Clip |
| 
 Versatile
90° angle clip can be a substitute for full length
outside corner angle to create an outside corner using
fillers.
Steel Product #SCL90000000000
Aluminum Product #ACL90000000000 |
|
| |
|
45°
Angle Clip |
| 
 Our
45° angle clip with rotating pins will affix two
filler panels to form outside corner opposite a hinged
inside corner. Can form 35° to 55°, depending
upon the tightness of wedges.
Product #SCL45000000000 |
|
| |
|
Aluminum
Cap Clip
|
|   The
aluminum cap clip is designed to create a cap with 2"x12"
lumber.
Product #ACL10000000000
|
|
| |
|
Cap/Filler
Bracket
|
| 
Cap/filler brackets are used in conjunction with lumber
to add height to a wall. The cap filler bracket pin
is inserted into the top of the concrete form and the
lumber is then nailed to the bracket. May also be used
to construct job site plywood fillers when you need
an extra filler or where you need to pass a pipe or
other object through the concrete form.
 
|
| |
|
Saddle
Bracket |
|   Unique
brackets that allow another option for brickledge. The
brackets pin onto the top rail of the lower form and
allows the next stacked concrete forms to be inset 4
inches or 6 inches.
4"~Product #SBK04000000000
6"~Product #SBK06000000000
|
|
| |
|
Brickledge
Bar
|
|   The
Brickledge Bar permits another option for brickledge.
The brackets pin onto the top rail of the lower form,
then wood is nailed to under side of bracket. Upper
panel is then placed on top of brickledge bar to create
a 4" brickledge.
Product #AOT00000000001
|
|
| |
|
Deck
Slide Clamp
|
|  The
deck slide clamp is used with the WTF ledger system.
Works with both the straight ledger and the crown mold
ledger. The deck slide clamp pin is placed through the
end bar hole into the ledger slot and then the slide
is engaged.
Product #SCP120000000000
  
|
| |
|
Window
Clamp
|
| 
The window clamp is used at the top of the wall when
a drop-in window buck is used. This clamp ensures that
the window buck maintains a tight fit.
Product #SCP13000000000 |
| |
Slide
Hammer |
|
  Used
to strip ledger and to break ties in crown mold ledger
applications. The slide hammer is used to ease the stripping
process of crown molding and wall panels under a deck.
Also used to vertically break crown molding ties.
Product #SOT10000000000
|
| |
Parapet
Bracket
|
|
  The
Parapet Bracket is used in suspending the formwork on
one side of the wall from the opposite side. This is
commonly used in concrete pool systems. Parapet Brackets
are also available to offset same height forms.
|
| |
Hand
Punch |
|
Our hand punch will add random pinholes with just a
little punch. Holes can be added to side or end rails
quickly in the field.
-Shipped with one 11/16" die set.
-Other die sets available
-Handles sold separately.
Product #SOT40000000000 |
| |
Plywood
Adapter |
|
 The
plywood adapter allows the contractor to produce a filler
using 1/2" or 5/8" plywood.
Specify hole pattern and plywood thickness
|
| |
|
|
