|   Crete-Lease
727 is a mineral based release agent that has been used
for more than 25 years. It applies at low and high ambient
temperatures and it exceeds all state and federal VOC
regulations.
Basic Use: Crete-Lease 727 permits easy stain-free
removal of concrete forms, formliners, pallets, etc.
from
hardened concrete. It:
~ Cuts form clean-up time up to 70% when properly applied.
~ Can reduce bugholes on concrete surfaces.
~ Does not interfere with adhesion of caulk, architectural
coatings, paint, sealers, and curing compounds on cured
concrete surfaces when properly applied.
~ Works superbly on aluminum forms.
~ Can be applied in sub-freezing or very hot temperatures.
~ Reduces incidences of skin rashes to an absolute minimum.
~ Can produce both high visual impact (CCS 2) and typical
concrete surfaces (CCS 3, CCS 4, CCS 5).
Even when applying 10 times more than required:
~ No staining when cured at ambient temperatures.
~ Concrete surfaces are not "killed".
~ Does not cause efflorescence.
Ready to use - Available in:
5 Gal. Pail ~ Product #CMCR7270000005
55 Gal. Drum ~ Product #CMCR7270000055
275 Gal. Mega Pack ~ Product #CMCR7270000275
|
Crete-Lease "BREAK-IN" Aluminum Form Conditioner
"Seasons" new aluminum concrete forms before
first use with concrete...helps prevent concrete from
sticking.