6" wide and less than 5 1/2" deep when fully
~ Has a permanent waler built into the top and bottom
of the system (Patent Pending).
~ Uses a tapered reusable cone with a rod tie.
~ Available in Smooth, Smooth Brick, Textured Brick
~ Attached wall braces, rod ties, and scaffold brackets
are stored on the form.
~ Simple system assembly.
~ 6-12 and 8-24 hole pattern included in the siderail
to allow for use of fillers and corners.
~ Uses only 2 ties up to 10' tall. The ties are spaced
on 42" intervals vertically.
~ Dry tie available for top of form on 10' and taller
~ Weighs less than 7 lbs. per square foot fully assembled.
The WTF Gang Adapter enables a contractor to create
gangs utilizing 36" wide aluminum concrete forms.
The system can be used for 8', 9' and 10' walls and
requires only two ties (spaced 42") at the gang
adapter. The Gang Adapter allows contractors to easily
transition to handset concrete forms by using the standard
pin and wedge.
Assembly of the system is very simple, requiring few
tools. The adapters are attached to the wall panels
using locking nuts and bolts provided by WTF.
8" bolt is used to attach the gang adapter to forms
on both sides.
A 2" bolt is provided for attachment of a single
form at the end of the gang.
The Aligner Waler Angle - this piece is made to match
desired gang lengths and is used to ensure the system
is straight. The Gang Adapter allows the Waler Angle
to be placed at the top and the bottom of the form.The
permanent waler is built of lightweight aluminum and
measures 3" x 3" x 1/2". Once assembled
the gang weighs less than 7 lbs. per square foot.
Scaffold brackets attach easily and require no loose
hardware. Various types and sizes are available.