|
Essential Extras
|
| These
essential extras assist in the setting and removal of
concrete forms and accessories |
|
|
| |
|
Wall
Aligner |
|
 This
practical tool creates movement of wall when prying
against footing. Permits one-person leverage to move
forms and square corners. The heavy-duty steel chain
is attached to the pin on the bottom of the concrete
form. Leverage end is heat-treated for extended life.
Also available with hook for chain adjustment.
Product #AOT20000000000
|
| |
|
Aluminum
Wall Brace |
|
Available in the following sizes:
13'6" - Ideal for 9' tall walls
Product #ABR00000013600
10'6" - Ideal for 8' tall walls
Product #ABR00000010600
5'3" - Ideal for 4' tall walls
Product #ABR00000005300 |
| |
|
Wall
Puller
|
|
  This
tool is for moving the wall after concrete forms are
set.
Product #AOT10000000000
|
| |
|
String
Line Attachment
|
| 
String line attachment is clamped to the top of the
OSC and is used to align the wall.
Product #SOT20000000000 |
| |
|
Form
& Corner Puller
|
|
 Used
to strip panels from top of wall. Ideal for brick-faced
concrete forms.
Product #SPU10000000000
|
| |
|
Siderail
Puller
|
|  Designed
to remove panels from ground level. Specify left or
right hand.
Product #SOT10000000000
|
|
| |
|
Turnbuckles
|
|  The
turnbuckle allows adjustment without moving brace. Easily
attached to either lumber or metal pipe to manipulate
wall braces that pin to the concrete form.
Product #SBR10000000000
|
| |
|
Wire
Ties
|
|
5 ½"~Product #SWT55000000000
6 ½"~Product #SWT65000000000
8" ~Product #SWT80000000000
5,000 per roll
|
|
| |
Tie
Twister |
|
 Used
to tie wire ties quickly and easily. Works with any
size wire tie.
Product #SOT30000000000
|
|
|
Bolts
|
|
 Foundation
bolts, 100 per bag
½" x 8" ~ Product #SB005080000000
½" x 10" ~ Product #SB005100000000
Also available with nut and washer.
Additional sizes available.
|
| |
Tie
Breaker Bar |
|
  Vertically
breaks ties quickly and easily without gouging the wall.
Product # SOT15000000000
|
| |
Hurricane
Strap |
|  20"~Product
#SB005200000000
24"~Product #SB005240000000
|
| |
Rod
Support |
|
  Designed
to hold rebar in position while placing concrete in
footings.
Single ~ Product #SR010000000000
Double ~ Product #SR020000000000
|
| |
Aligner
Clamps |
|
  Aligner
clamp with 5/8" pin, ¾" gap is used
to pin aluminum brickledge to top of concrete forms.
Also used to pin top rail to bottom rail in stacking
and cap form applications.
Product #SCP10000000000 |
| |
|
|
