|
Brickledge Forms
|
| Our aluminum
brickledge concrete forms are used when adding a brickledge
around the outside of a foundation wall. |
|
|
Drop-In Method
6”x6” Plate Bracket With
4” Slot
2" Lug Bracket w/ 1” Obround
Hole
Slipover Brickledge Form
Denver Brickledge
Offset Method
Offset Endbar Panel
Saddle Bracket
Brickledge Bar
|
| |
|
Drop-In
Method
|
| |
6”x6”
Plate Bracket With 4” Slot |
|
 Attaches
to top of forms with pin and wedge, aligner clamp with
5/8" pin, vise-grips or "C" clamp. Provides
more opportunity to align with holes at end rails due
to the slotted plates.Brickledge over 17" in depth
has a nailer area provided for simple attachment to
the form. This eliminates creeling problems. Also available
with 8" and 10" plate
|
| |
|
2"
Lug Bracket w/ 1” Obround Hole
|
|   Attaches
to top of forms with pin and wedge, aligner clamp with
5/8" pin, vise-grips or "C" clamp.
|
| |
|
Slipover
Brickledge Form
|
|
   Available
in steel or aluminum. Slipover brickledge forms are
used to create various sized brickledge fillers. Used
in conjunction with Plate or Lug Bracket Brickledge.
Available in sizes up to 24" wide
|
| |
|
Denver
Brickledge |
|
   Just
as its name implies, this was originally designed for
the Denver area. It's perfect for allowing adjustment
to your brickledge depth by pinning to the interior
hole of a combination tie.
|
| |
Offset
Method |
Offset Endbar Panel
|
  Can
be built with 2” or 4" offset for brickledge
application
|
| |
Saddle
Bracket |
|
  Unique
brackets that allow another option for brickledge. The
brackets pin onto the top rail of the lower form and
allows the next stacked forms to be inset 4 inches or
6 inches.
|
| |
Brickledge
Bar |
|
  The
Brickledge Bar permits another option for brickledge.
The brackets pin onto the top rail of the lower form,
then wood is nailed to under side of bracket. Upper
panel is then placed on top of brickledge bar to create
a 4" brickledge.
|
| |
|
|
|
